Archive for August, 2010

I remember…….back when raves were promoted primarily by flyers printed on actual paper and distributed to record shops that had storefronts you could go and visit……….that a “DJ profile/bio” used to just mean someone’s name and their affiliations to rave collectives and later to record labels. Sure, DJs that were big enough to have an agent probably already had a paragraph or two about them written down somewhere, but they circulated in a smaller, closed circuit of “professionals” behind the scenes. Fast forward 15 years later, even beginning DJs have a carefully-crafted “bio” to email to anyone, to bundle into their press kit, and to post on their blog, personal website, MySpace Music profile, Facebook fanpage, Soundcloud user page, Resident Advisor DJ page, and so on. The move of event promotion from paper flyers (where space is limited and expensive) to the internet (where space is cheap, but attention is hard to keep) has vastly expanded the amount of information we expect to have available for a DJ: a few well-targeted web searches about any particular DJ will provide you with a discography (including collaborations and remixes), DJ charts (where a DJ lists his/her “top ten” records of the moment), several versions of the DJ’s biography, images of him/her, DJ mixes/podcasts, videos of the DJ performing live, and if he/she is doing well, a few interviews. These changed expectations mean that DJs launching their careers now are under enormous pressure to generate media presence at levels that DJs of the 80s and 90s never even imagined. In particular, the “biographic” aspect of the DJ profile has become an important element of career-building and marketing and, like any other type of marketing, there are certain narratives (story lines, themes, events) that sell well.

In other words there are clichés and standard formulas for writing a DJ profile, and the sheer number of DJ profiles available today makes these clichés obvious and played. Certainly anyone who goes out to Electronic Dance Music (EDM) events (and, therefore, is active in the online communities that list these events) has probably read hundreds if not thousands of DJ bios already and can probably name a few of these formulas without effort. Here’s the short list of some of these formulas:

DJ XYZ

  • “…started playing records when s/he was 10 years old.”
  • “…benefited from his/her parent(s)’s vast eclectic record collection and so started from a very young age.”
  • “…is the child of professional musicians.”
  • “…is a classically trained pianist.” (i.e., took piano lessons at age 9-11)
  • “…is not just a whiz behind the decks, but also a classically-trained trombonist and has a doctorate in quantum physics.” (extra points if these things have nothing to do with the kind of music s/he makes)
  • “…has always had a keen interest in music.” (no shit!)
  • “…started playing at local parties.” Or, for bonus points: “…Originally hailing from Quietville, WI, soon found the club scene of nearby Trendycity irresistable, and so relocated at age 19 to try his hand behind the decks.” (i.e., a combination of “authentic” small-scene origins and trendy big-city prestige: “I’m not fake and snobby like these scenesters here, but I proved myself on their turf.”)
  • “…developed his/her encyclopedic knowledge of electronic music by working in the local recordshop.”
  • “…has shared the decks with such techno luminaries as SuperstarDJ1, RetiredButRespectedVeteran2, and FlavorOfTheMonth3.” (i.e., s/he played 6 hours earlier/later and never met any of them)
  • “…has influences ranging from Kraftwerk to Miles Davis, via George Clinton, Joy Division, and classic sixties beat pop” (especially when there’s absolutely no evidence of these sounds in his/her fairly straight-up minimal techno)
  • “…is deeply steeped in the legacy of Chicago house and/or Detroit techno and/or New York garage.”
  • “…is known for spinning eclectic sets,” or “…is not limited to any genre, combining deep house, pounding techno, dubstep, disco, and baile funk.” (+1 point for every genre named that never actually appears in any of his/her mixes)
  • “…is completely self-taught, not having even the benefit of observing/consulting other DJs. So pure is her/his talent on the decks.”
  • “…always whips the crowd into a frenzy,” or some variation on this theme. This is, after all, what counts as the “bottom line” for promoters who are looking to book a DJ; the biographical information might help sell the event, but the promoter wants a guarantee that the DJ will create the sort of excitement that drives up drink sales and builds the club’s reputation.
  • “…has released the banging tune Y, with support from Ritchie Hawtin, DJ Hell, William Orbit and others” (where tune Y probably isn’t all that well known, and “support” is vague and ill-defined.)

Read altogether like this, these clichés are ripe for parody. In fact, let me improvise a spoof profile in five minutes:

DJ Glittersnizz has been rocking the decks since he was barely toilet-trained, when he rifled through his parents’ vast and eclectic record collection and started experimenting with the controls on their old walnut-veneered record player. He grew up in a profoundly musical household, his parents being professional musicians who put him into classical piano and jazz guitar lessons from the moment he had enough motor control in his hands to hold a guitar pick. He is nonetheless a completely self-taught DJ, buying all the necessary gear with money saved up from a part-time job as a dishwasher and learning by bringing a new piece of musical technology home, plugging it in, and pushing all the buttons until something happened. The first record he bought was a now-out-of-print EP of Parliament Funkadelic covering Kraftwerk’s “Calculator.”

He began playing in local bars and clubs in his hometown of  Nowheresville, getting his first break when the DJ called in sick at a local pub where he washed dishes. He soon blew up in Nowheresville and began playing in TrendyStateCapital, after he was discovered by Well-ConnectedScenester of the BigCityPartyPromoter crew. He was taken under the wing of EstablishedVeteranDJ1, who took him on tour to Ibiza, Berlin, Tokyo, Santiago, Miami, and some secret techno resort that common tourists don’t know about. He has since enjoyed immense success, blowing up dancefloors across the globe (OK, OK, mostly around TrendyStateCapital) to sold-out crowds. He has shared the decks with the likes of SuperStarDJ1, EstablishedVeteranDJ2, and HotForTheNextMonth3, all of whom played at his afterparties in the swank uptown loft that his parents are TOTALLY not paying for, he swears. He is also a prolific and respected producer, having released two albums and 10 EPs since he got up this morning. His most recent mega-hit track, “My Snizz is Glittery,” has been charted by every single fucking DJ listed on Resident Advisor and Discogs combined, with support from all the leading DJs signed to any label that ever mattered—plus his grandma.

Glittersnizz’s musical style reflects his eclectic influences—from high-modernist integral serialism to jazz-funk fusion to Armenian epic poetry to 80s hair metal—all distilled down to pure, crystalline minimal techno. He’s not limited to minimal techno, instead combining disco, dubstep, clickpop, glitch, and progressive house to create a new sound that the entire staff of Pitchfork has been trying to name for the last year (the senior what-is-this-electronica-crap editor suggested “jigglestep” and then resigned in shame).

There you go. That took a bit more than a few minutes because I got carried away. There’s this interesting collision between the 19th-century Romantic “natural genius” narrative and the 20th-century American Dream “I earned this all through hard work” narrative, which produces odd contrasts and contradictions. A greater challenge, however, is to write a DJ bio that is the opposite of these clichés. I’m not thinking of replacing the positive hyperbole with negative hyperbole—that would be far too easy and much too boring—but instead produce a biography that is unremarkable, banal, modest, ambivalent, and even a bit realistic. Here’s what I came up with:

DJ Meh never really had a particular interest in music, and is only really getting into DJing because his other friends have been doing it and he’s beginning to feel left out. He comes from a middle-class, suburban home, where he shuffled his way through the educational system without any major incidents and moved on to the nearest state university to pursue a degree in economics (with a minor in psychology). His parents supported him through school, so he was able to buy cassettes and CDs when he liked (never vinyl records, though) and he could occasionally indulge in musical whims: he bought a used Roland 606 from a pawn shop during a moment when he was fascinated by sampling technology and, not knowing its market value, sold it back to the pawn shop for $20 when he got bored with it. The same thing happened to a guitar, an ill-fated hamster, a Dungeons & Dragons gaming set, and a screenprinting kit. Despite his financial security, he did have a part-time job during high school at a chain fast-food restaurant, where the only music-related thing he learned is that you shouldn’t call banda music “mariachi” music, especially in the presence of those Latino guys that were always working the fryers.

Meh used the funds from his lucrative consulting job to buy all the top-of-the-line gear on a whim, which he may or may not be using in a month. Too impatient to learn through trial-and-error and observation, he purchased several “How to DJ” instructional videos and has hired a local wedding/event DJ to teach him how to mix records. His musical influences have mostly been top-40 chart-pop, not-so-indie rock, and whatever hip-hop and r’n’b that iTunes recommends to him. His musical style is a generic mix of house and tech-house, mostly chosen from whatever tracks show up on DJ-charts, whatever Beatport suggests when he logs in, and any tracks that his DJ friends mention more than once.

DJ Meh feels quite good about his infrequent gigs over the past few months, which some people in attendance have described as “surprisingly decent.” Some guy from a downtown event promoter has expressed interest in booking him as an opening DJ, and there is some hope that he might even get booked out of town. He hasn’t played with any internationally-known DJs (or nationally-known, for that matter), but he once picked up Richie Hawtin from the airport for a gig, and he had very polite things to say about the mix-CD that DJ Meh insisted on playing the whole drive into town. Other DJs have said that Meh is “a very nice guy” and “vaguely memorable.” He has enjoyed moderate success with his first track, “Sigh, Shrug, and Continue,” which has garnered support from a handful of B-list DJs—although maybe they were just providing support to increase their own profile in the industry.

DJ Meh doesn’t really know what he’s up to next. He’s been digging this DJ thing alright, but it doesn’t feel all that important to him.

So how will you update or create your next bio? Observe my actions, don’t follow my lead, but most of make sure to develop a better bio than I have.

21
Aug

How To Make An Instrument Cable

   Posted by: AUDIOMIND   in Random


Buying Components

Buy cable “off the reel”

With a little online research, you should be able to find an electrical parts supplier near you that sells good quality cables “off the reel” (i.e., they’ll cut you a length of whatever cable you want). Look out for cables from manufacturers including Canare, Klotz, Sommer and Van den Hul, but don’t be afraid to check out the specifications on others, too, and if it looks good, see if they store will let you have a free sample to test it out with.

It’s usually worth buying about 1 m (3 ft) more than you think you’ll need, just to give you a wide margin for error.

Get the right plugs

For one guitar cable, you’ll need 2 good quality mono plugs. As I mentioned earlier, any good quality, metal cased straight or angled 1/4” plug will work well: there’s no need to use gold plated plugs.


Set Up Your Workspace

Any desk or table where you can sit comfortably will work fine as a workbench but, unless it’s an actual workbench, do take care to put down an old blanket or some newspaper before starting work.

You’ll need:

  • A soldering iron and stand
  • Some solder
  • A damp sponge or cloth to wipe the iron on
  • A sharp knife or wire strippers
  • And, since we’re dealing with hot things and cable that can have a mind of its own, some means of holding the cable steady while you work. You can buy “helping hands” which have adjustable arms and crocodile clips but, if you don’t have one, I’ve found that using some Blu-Tack to hold the wire or plug still works quite well.

Step 1: Stripping the Insulation

At each end of your cable, carefully strip about 1 cm of the plastic insulation from the cable. I like to do this by rolling the cable on a penknife blade since it feels more precise and controlled than using my (admittedly rather blunt) wire strippers, especially when dealing with the conductor. Whatever method you use, be careful to apply only enough pressure to cut the cable jacket: don’t snip right through the copper wire! This is where that extra metre of cable can come in handy.


Step 2: Prepare the Wire

The conductor is the thin wire in the centre of the cable. The shield is the outer layer of copper strands, and is usually braided around the circumference of the cable.

Tightly twist the shield strands together, making sure there are no loose strands, and fold it back out of the way. Now strip around 5 mm of the inner jacket from the end of the conductor wire, using either a knife or wire strippers. As before, twist the copper strands together.

Before going any further, check that the cable fits properly into the plug. The grip on the connector needs to be able to clasp around the outer jacket of the cable, and the two wires should be able to reach their respective terminals (centre conductor to the centre terminal, outer shielding to the outer terminal). Ideally, we want as little exposed wire in there as possible, so it should be quite a tight fit without straining the wire. If necessary, strip a little more insulation until you have a good fit.

Now, we’ll “tin” the ends of these wires with solder to keep them from unravelling and help them adhere to the terminals in the plug. We want to ensure there are no stray strands of copper so, before soldering, double check that the wire is properly twisted together.

Get your soldering iron hot and, starting with the shield, place it under the twisted wire. Touch the iron to the copper for a moment before bringing the solder down on to the top of the wire. The solder should melt over the twisted copper strands, forming a neat cap of solder. You may need to repeat the process a couple of times to get even coverage.

Warning: copper is a good conductor of heat, as well as electricity, so avoid holding the wire with bare hands.


Step 3: Solder the Cable to the Plug

Before you solder, do a quick trial assembly to make sure everything fits and you know which parts of the plug casing need to be on the cable before you attach the plug.

Grip the connector with your helping hand, or Blu-Tack it to your workbench, and gently heat the outer terminal with the iron. Don’t overdo it or you may damage the plug. Touch a little solder onto the terminal and then solder the screening wire to it. Now do the same thing with the centre conductor, attaching it to the centre terminal of the plug.

Make sure your work is tidy: you don’t want any stray strands of wire touching across the terminals or the outer casing of the plug.

Now assemble the plug and screw it together, being careful not to twist the cable in the plug casing.


Step 4: Rinse, Repeat and Test

Clean your soldering iron and repeat the above process for the other end of the cable. Before you pack up your soldering iron, plug the cable in to make sure it works and that there are no unwanted noises. If it isn’t working, or there is noise, check both ends of the cable to see that there are no stray strands of wire and that you’ve connected to the correct terminals.


Step 5: Rock!

http://audio.tutsplus.com/articles/general/quality-instrument-cable-why-it-matters-and-how-to-make-your-own/

17
Aug

Optical Illusion Animations Created Using a Turntable

   Posted by: AUDIOMIND   in Random

YouTube persona brusspup used a turntable spinning at 45RPM for several creative optical illusion animations. To the human eye everything appears to look like a blur on the turntable, but when recorded at 2 dozen frames per second cool animations appear!

http://en.wikipedia.org/wiki/Zoetrope

In the video description he writes;

Watch as hidden animations come alive by using a specific frame rate and shutter speeds of a camera and RPM of a record player.

To me this is one of the ultimate illusions.

Definition of Illusion: something that deceives by producing a false or misleading impression of reality.

I used a Numark turntable set to 45 RPM and the camera was set to 24 FPS. The shutter speed was set to around 840. With that combination of settings a 30 frame animation would appear to stand still. I used the slider to increase / descrease rpms which caused the images to move foward or backward.

The sequence of the guy jumping on the blocks was the most difficult but turned out the best, in my opinion.

The images of the guy jumping is me. I recorded myself jumping in the living room then took 30 frames from that footage and traced the images in photoshop and filled with black. Then printed out the 30 images and cut each one out. I used 30 wooden blocks and glued them to a piece of construction paper then taped the images of the jumping guy to the clear sheet and aligned them with the blocks.

I also love the pac-man animation. It’s so simple but just has such a cool feel to see the mouth opening and closing.

Publish

Published Edit

OK Cancel

Visibility: Public Edit





OK Cancel
Published on: Aug 17, 2010 @ 22:37 Edit

,

@

:

OK Cancel

Post Tags

Add or remove tags

Separate tags with commas.

X animations X digital photography X optical illusions X turntable

Categories

+ Add New Category

Permalink: http://www.audiomind.us/blog/2010/08/17/optical-illusi…ng-a-turntable/ Edit optical-illusion-animations-created-using-a-turntable View Post

HTML Visual

Upload/Insert Add an Image Add Video Add Audio Add Media

Font family
Font size

Path: blockquote » p » em

Word count: 263 Last edited by AUDIOMIND on August 17, 2010 at 10:37 PM

Excerpt

Excerpts are optional hand-crafted summaries of your content that can be used in your theme. Learn more about manual excerpts.

Send Trackbacks

(Separate multiple URLs with spaces)

Trackbacks are a way to notify legacy blog systems that you’ve linked to them. If you link other WordPress blogs they’ll be notified automatically using pingbacks, no other action necessary.

Custom Fields

Name Value

Add new custom field:

Enter new

Custom fields can be used to add extra metadata to a post that you can use in your theme.

Discussion

Allow comments on this post

Post Author

Comments

No comments yet.

Post Revisions

Tweet This

Please enter your Twitter username and password under Settings > Tweet This

Page 1 of 11